The main factors for the frequent swing of the stainless steel pressure gauge pointer
The pointer of the stainless steel pressure gauge will not have such obvious vibration, if the vibration phenomenon in the workplace is relatively small. The swing amplitude is also significantly reduced. If the meter is subject to severe vibrations, when the amplitude of the left and right swing of the meter pointer exceeds 5%, it is very difficult to read the display value of the meter at this time. The violent swing phenomenon of the pointer is also related to the properties of the medium measured. For example, if the instrument is used to measure the pulsating pressure, it is likely to cause the problem of the pointer swinging from side to side. This is because this pressure will change periodically with time. In the process of measuring its pressure, the pointer of the meter will also swing left and right due to the influence of the force.
Sometimes the pointer of the meter will swing frequently. In the process of analyzing this problem, the stainless steel pressure gauge is working on pressure measurement. It was found that when the user installed the instrument, there was obvious vibration in the workplace where the instrument was located, which also caused the pointer of the stainless steel pressure gauge to swing frequently. In fact, this may not be a problem of the quality of the stainless steel pressure gauge itself. The frequent swinging phenomenon may be due to the vibration of the working environment. This is because if the vibration amplitude of the workplace where the meter is located is relatively large, it will naturally cause the pointer to swing significantly and with a large amplitude.
