+86-571-88550927

How to analyze the failure of the pressure gauge

Jul 20, 2021

How to analyze the failure of the pressure gauge


33

Generally speaking, if the instrument fails and cannot be used normally, the reason can be found from the following 4 aspects.

     1. Insufficiency or defects in the design, manufacture, and inspection of the meter itself cause the occurrence of meter failure;

     2. Improper selection of the instrument, causing damage to the instrument during use;

     3. The instrument is damaged due to improper transportation and handling;

     4. Improper use of the instrument on site, causing damage to the instrument;

     The main responsible party for instrument failure analysis should be the instrument manufacturer, because they are familiar with the basic structure, performance and use requirements of the instrument. In order to correctly analyze the real reason for the failure of the instrument, the manufacturer needs to understand the relevant situation of the malfunctioning instrument. Sometimes the manufacturer needs to send people to the instrument use site to investigate the situation and obtain first-hand information. But in fact, due to various reasons, every time something goes wrong, it is impossible for the production plant to send people to the site. In this way, as the user of the instrument, the user should actively cooperate with the work of the manufacturer, meet the requirements of the manufacturer as much as possible, and provide some relevant information about the on-site work of the faulty instrument.

     E.g:

     If the watch glass is broken or the pointer is far from zero, see if it is concentrated in one or two boxes;

     If the pointer is bent, the pressure relief status of the instrument must be provided;

     If the teeth of the central axis of the movement are worn out, the thermal resistance of the vibration of the instrument should be provided;

     If the diaphragm or spring tube of the instrument is rotten, the working medium measured by the instrument and the working temperature of the medium shall be provided;

     If there are more instruments that indicate inaccurate values or out-of-poor indications, it is best to provide corresponding inspection records.

     That is to say, only the user can cooperate and cooperate with the manufacturer to find out the real cause of the failure of the instrument, and then to distinguish the responsibility, in order to give the user a satisfactory answer.


Send Inquiry