+86-571-88550927

Contact Us

  • Factory: No.90 xinxin Rd, Fengdu industrial zone, Hangzhou, China.311115.
  • Office: Rm 707, 3# haloplaza, Liangzhu, Yuhang Dist, Hangzhou, China.
  • Jeffkf1502@163.com
  • Tel: +86-0571-88550927

  • Fax: +86-0571- 88550920

  • Wechat / Whatsapp: + 86 18758159121

How To Select The Range Of Pressure Gauges

Mar 12, 2021

When measuring more stable pressure, the measuring range should be 1.5 times of the measured value; When measuring fluctuating pressure, the maximum range shall be 2 times of the measured value. The measuring range of the pressure gauge should be selected appropriately, so that the service life of the instrument can be extended.

0.3

Selection of pressure gauge range:

1. When measuring the stable pressure, the working pressure should not exceed 2/3 of the measuring range.

2. When measuring the pulsation pressure, the working pressure should not exceed 1/2 of the measuring range.

3. When measuring high pressure, the working pressure should not exceed 3/5 of the measuring range.

4. In order to ensure the accuracy of measurement, the working pressure should not be lower than 1/3 of the range. According to the above principles, after calculating a value according to the maximum pressure to be measured, select the value slightly greater than the value from the range series of the pressure gauge to be the selected range.


Measurement of different media and use environment to choose different pressure gauges:

(1) General media, such as air, water, steam, oil, etc., can be used Y-type ordinary pressure gauge, the case is black. Usually there are several common types of axial pressure gauge, radial pressure gauge, axial band edge and radial band edge;

(2) special pressure gauge for some media, such as ammonia type YA ammonia pressure gauge, the shell is yellow; YO oxygen pressure gauge for oxygen, its shell is sky blue; Oxygen pressure gauge, acetylene pressure gauge should be strictly prohibited oil, in case the table is stained with oil, syringe can be used to inject carbon tetrachloride into the spring tube; Clean before use.

(3) for the strong corrosive media and corrosive gas environment, such as dilute hydrochloric acid, hydrochloric acid gas pressure measurement, in addition to the isolation method of measurement, can also choose YB series stainless steel pressure gauge, but all stainless steel pressure gauge is not suitable for the environment with corrosive media, such as chlorine, nitric acid. YM series diaphragm pressure gauge can also be selected, the diaphragm materials are 0Cr7NiNi2Mo2 (316), Monel alloy (Cu30Ni70), Hastelloy alloy (H276C), tantalum (TA) and fluoroplastic (F4), Diangon.com can be selected according to the measuring medium, And according to the requirements of the medium to be measured in its body filled with appropriate working fluid, such as glycerol or silicone oil. This kind of instrument is widely used in petrochemical industry, its indirect measuring structure, suitable for measuring viscosity, easy crystallization, corrosive, high temperature of liquid, gas or solid floating medium pressure. Isolation diaphragms are available in a variety of materials to accommodate a variety of different measuring media.


Send Inquiry