Should the pressure gauge be installed in this way?
According to the national standard "General Pressure Gauges" GB/T1226-2001, Section 4.1.2 of the pressure gauge can be divided into: directly installed pressure gauges, embedded (panel mounted) pressure gauges, and protruding (wall mounted) pressure gauges according to their threaded joints and installation methods.
1. The installation position of the pressure gauge should meet the requirements of the installation status. The dial should generally not be placed horizontally, and the height of the installation position should be easy for staff to observe.
2. The distance between the installation location of the pressure gauge and the pressure measuring point should be as short as possible to ensure good sealing and prevent leakage.
3. There should be a buffer at the front end of the installed pressure gauge; For the convenience of inspection, a shut-off valve should be installed below the instrument; When the medium is dirty or has pulse pressure, filters, buffers and stabilized air can be used
