+86-571-88550927

Contact Us

  • Factory: No.90 xinxin Rd, Fengdu industrial zone, Hangzhou, China.311115.
  • Office: Rm 707, 3# haloplaza, Liangzhu, Yuhang Dist, Hangzhou, China.
  • Jeffkf1502@163.com
  • Tel: +86-0571-88550927

  • Fax: +86-0571- 88550920

  • Wechat / Whatsapp: + 86 18758159121

What? Gauge, Vacuum?

May 30, 2022

Vacuum gauge: A gauge that measures less than atmospheric pressure based on atmospheric pressure.

Pressure vacuum gauge: A gauge used to measure greater and less than atmospheric pressure based on atmospheric pressure.

5.29B

Pressure vacuum gauges and vacuum gauges are used to measure the pressure or negative pressure of non-crystalline, non-solidified liquid, gas or steam media that has no corrosive effect on steel, copper and copper alloys, no explosion hazard.

The shock-resistant vacuum gauge is used to measure the negative pressure of non-corrosive and non-crystalline media under vibration and pressure fluctuations.

Electric contact pressure vacuum gauge and electric contact vacuum gauge Copper and copper alloys are non-corrosive, non-crystalline and non-solidifying liquids, gases and other media (pressure) and negative pressure without explosion risk. When the pressure reaches a predetermined value, by means of the contact device, the control circuit can be turned on or off, and an electrical signal is sent out at the same time.

Electric contact pressure vacuum gauge is used to measure the pressure and negative pressure of copper and copper alloy non-corrosive, non-explosive, non-crystalline and non-solidified liquid, gas and other media. When the pressure and negative pressure reach a predetermined value, the control circuit can be turned on or off by using the magnetic electric contact device

Electric contact vacuum gauge is used to measure the negative pressure of liquid, gas or steam without corrosion of copper and copper alloys. And when the negative pressure reaches a predetermined value, an electrical signal is sent to turn on or off the control circuit.

Stainless steel vacuum gauge and stainless steel pressure vacuum gauge are used to measure the pressure and negative pressure of liquid and gas medium that have no corrosive effect on stainless steel 316, 316L and 0Crl8Ni12MO2Ti. All stainless steel has stronger corrosion resistance to the environment.

Acid-resistant pressure vacuum gauge is used to measure the pressure and negative pressure of nitric acid and alkali liquid medium; acid-resistant vacuum gauge is used to measure the negative pressure of nitric acid and alkali liquid.

5.29A

The main features of vacuum pressure gauge are as follows:

(1) Stable performance, high measurement accuracy and fast response speed

(2) It is an absolute vacuum gauge, which can be used as a standard vacuum with an accuracy of 0.5 or higher.

(3) The total pressure is measured, including the pressure of gas and steam

(4) The results of the measurement have nothing to do with the type, composition and properties of the gas

(5) During the measurement process, the vacuum gauge itself has very little inhalation and outgassing, which will not affect the measured atmosphere.

(6) There are no high temperature parts inside the vacuum gauge, which will not decompose the oil vapor

(7) If it is made of corrosion-resistant materials, it can measure the pressure of corrosive gas

(8) The structure is firm, and it is easy to seal and install

(9) Easy to operate, no adjustment is required, but regular calibration is required


Send Inquiry