Pressure sensors usually measure pressure changes by the deformation of the diaphragm. If one side of the diaphragm is acting under process pressure and the other side is open (exposed to ambient pressure), the deformation of the diaphragm will be reduced due to this ambient pressure.
In this case, the measurement is actually the pressure difference between the process pressure and the environmental pressure. For absolute pressure sensors/transmitters, the "inside" side (the side on which the sensor is not in contact with the pressure medium) is vacuumed and then permanently sealed. Therefore, the measured deformation of the diaphragm is independent of the ambient pressure, always using the sealed vacuum as the reference and zero point.
This design makes it possible to measure the current ambient pressure because the sealed vacuum (" 0bar ambient pressure ") represents a fixed reference point that is independent of the current weather conditions and the sensor height position. One of the typical applications of absolute pressure sensors is the barometer, which measures the current environmental pressure and is used to predict changes in the weather. Another application is an altimeter, which uses the principle that atmospheric pressure decreases with altitude to measure atmospheric pressure and convert it into a height reading with reference to mean sea level.
In industrial applications, absolute pressure sensors are needed to obtain high accuracy in low-voltage applications measuring vacuum degree. For example, in meat packaging, the required vacuum must be generated to safely guarantee the longest shelf life. The amount of oxygen remaining in the package (that is, the residual pressure relative to the vacuum) is inversely proportional to the shelf life of the packaged food. The use of a relative pressure sensor in this case can result in inaccuracies in measurements due to atmospheric variations up to +/- 30mbar. Since the maximum residual pressure of food packaging should be 65mbar, this will lead to an inability to guarantee an effective shelf life.







