+86-571-88550927

Contact Us

  • Factory: No.90 xinxin Rd, Fengdu industrial zone, Hangzhou, China.311115.
  • Office: Rm 707, 3# haloplaza, Liangzhu, Yuhang Dist, Hangzhou, China.
  • Jeffkf1502@163.com
  • Tel: +86-0571-88550927

  • Fax: +86-0571- 88550920

  • Wechat / Whatsapp: + 86 18758159121

Analysis Of The Causes Of Dial Deviation

Jul 13, 2021

Analysis of the Causes of Dial Deviation

Dial deflection means that the gap between the dial and the inner diameter of the case is large on one side and small on the other.

      The same as the tilt of the dial, the deflection of the thermal resistance dial does not necessarily affect the normal use of the meter, but there are indeed users who require repairs, replacement of pressure gauges, or even returns for this.

33

      Like dial tilt, dial deflection generally occurs on pressure gauges with reverse mounted movements.

      1. The second reason for the tilt of the dial of the stainless steel pressure gauge may come from the incorrect position of the joint hole on the joint. If the case hole deviates from the center line to the left, after the joint is installed, the dial will shift to the left. If the hole of the watch case deviates from the center line downwards, after installing the connector, the thermal resistance dial will be tilted downwards.

      2. The second reason for the tilt of the dial may come from the incorrectly fixed screw hole of the watch case on the connector. If the screw hole of the connector is offset to the right, the dial will be tilted to the left after the watch case is installed. On the contrary, if the screw hole of the connector is to the left If the watch case is installed, the dial will be skewed to the right.

      It is inferred that if the screw hole of the connector is up or down from the center, after installing the watch case, the dial will be tilted downward or upward.

      3. For a two-piece pressure gauge, the verticality deviation between the fixed surface of the case and the joint and the axis is also one of the reasons for the tilt of the dial.


Send Inquiry